So why does my betta like to stick to the filter. Some fishes do weird things sometimes it can be for a reason. Watch carefully as the betta swims against the current coming out of the filter. Do you swim straight? Are there any signs of struggle. If you see that the males are having problems, it means that the flow in the filter is too high. You need to reduce it immediately. For most modern filters this is not a problem, as they are equipped with an adjustment knob.
Simply adjust the knob to the desired flow rate. But what if your filter doesn’t have an adjustment knob? It is better to buy a better filter with an adjustment knob. However, if you don’t have the budget, there are things you can do to drastically reduce traffic. In the next section, I will talk about some ways to reduce filter flow.
Why does my betta like to stick to the filter – Reduce filter flow
Before talking about some ways to reduce the flow of the filter, let me first say that the best way to reduce the flow is to use the adjustment knob. Most modern filters have adjustment knobs. If your filter doesn’t, it’s probably not a very good quality product and you may need to upgrade your filtration system. That said, let’s look at some homemade methods to reduce filter consumption.
Why does my betta fish stare at me
Use a pre-filter sponge
The first thing you can do is to use a sponge at the entrance to the filter. The inlet is the hole in the aquarium filter through which water enters the filter. If you can reduce the rate at which water enters the filter, this will automatically reduce the flow through the filter.
If you don’t have a sponge, just take a piece of filter wool, cut it into a small rectangle and wrap it around the entrance. It will also serve as an excellent mechanical filter. The filter flow is still too high, put filter wool in the filter chamber. Most hobs have a baffle inside the chamber. The partition divides the bedroom into two compartments. Water collects in the first chamber and then enters the second chamber through some sort of hole or slit in the top. The second chamber contains various filter materials. You can put filter wool on the holes or nooks where the water passes from the first chamber to the second. The second filter fiber also creates a sort of barrier in the channel and reduces the flow rate of the filter.
Why does my betta like to stick to the filter – Create a bevel
This is the best way to reduce filter consumption. However, it requires some work. First you will need a plastic bottle. Use sharp scissors to cut the top and bottom of the bottle, making sure the length of the bottle matches the length of the filter outlet.
Now cut the bottle lengthwise so that it is no longer a tube. After that, you need to connect the bottle to the outlet of the filter so that the water first touches the sides of the bottle, and then falls. The process is much simpler than the explanation. If you’re confused, watch the video above. This approach will significantly reduce filter consumption. However, it does not look very good and may require frequent maintenance. If you ask us, we always recommend buying a good quality filter with adjustable flow.
So this is all you need to know about betta fish behaviours. If you want to read more about fishes reach the site dellypets fishes category to see more.
